Discrepant soil microbial community and C cycling function responses to conventional and biodegradable microplastics.

Biodegradable microplastics (MPs) are promising alternatives to conventional MPs and are of high global concern. However, their discrepant effects on soil microorganisms and functions are poorly understood. In this study, polyethylene (PE) and polylactic acid (PLA) MPs were selected to investigate the different effects on soil microbiome and C-cycling genes using high-throughput sequencing and real-time quantitative PCR, as well as the morphology and functional group changes of MPs, using scanning electron microscopy and Fourier transform infrared spectroscopy, and the driving factors were identified. The results showed that distinct taxa with potential for MP degradation and nitrogen cycling were enriched in soils with PLA and PE, respectively. PLA, smaller size (150-180 µm), and 5% (w/w) of MPs enhanced the network complexity compared with PE, larger size (250-300 µm), and 1% (w/w) of MPs, respectively. PLA increased ß-glucosidase by up to 2.53 times, while PE (150-180 µm) reduced by 38.26-44.01% and PE (250-300 µm) increased by 19.00-22.51% at 30 days. Amylase was increased by up to 5.83 times by PLA (150-180 µm) but reduced by 40.26-62.96% by PLA (250-300 µm) and 16.11-43.92% by PE. The genes cbbL, cbhI, abfA, and Lac were enhanced by 37.16%- 1.99 times, 46.35%- 26.46 times, 8.41%- 69.04%, and 90.81%- 5.85 times by PLA except for PLA1B/5B at 30 days. These effects were associated with soil pH, NO3--N, and MP biodegradability. These findings systematically provide an understanding of the impact of biodegradable MPs on the potential for global climate change.

Synergistic interaction between scrap tyre and plastics for the production of sulphur-free, light oil from fast co-pyrolysis.

Fast co-pyrolysis offers a sustainable solution for upcycling polymer waste, including scrap tyre and plastics. Previous studies primarily focused on slow heating rates, neglecting synergistic mechanisms and sulphur transformation in co-pyrolysis with tyre. This research explored fast co-pyrolysis of scrap tyre with polypropylene (PP), low-density polyethylene (LDPE), and polystyrene (PS) to understand synergistic effects and sulphur transformation mechanisms. A pronounced synergy was observed between scrap tyre and plastics, with the nature of the synergy being plastic-type dependent. Remarkably, blending 75 wt% PS or LDPE with tyre effectively eliminated sulphur-bearing compounds in the liquid product. This reduction in sulphur content can substantially mitigate the release of hazardous materials into the environment, emphasizing the environmental significance of co-pyrolysis. The synergy between PP or LDPE and tyre amplified the production of lighter hydrocarbons, while PS's interaction led to the creation of monocyclic aromatics. These findings offer insights into the intricate chemistry of scrap tyre and plastic interactions and highlight the potential of co-pyrolysis in waste management. By converting potential pollutants into valuable products, this method can significantly reduce the release of hazardous materials into the environment.

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor.

There is a serious concern about the large amount of accumulated plastic waste all around the world. Synthetic polymers such as polyethylene terephthalate (PET), polypropylene (PP), and polyethylene (HDPE, LDPE) are substantially present in the plastic waste generated. There are various methods reported to minimise such plastics waste with certain limitations. To overcome such limitations the present study have been carried out in which thermal decomposition of plastic waste of PET, PP, HDPE, and LDPE studied using a novel plasma pyrolysis reactor. The major objective of this work is to investigate the viability of the continuous plasma pyrolysis process for the treatment of various plastic wastes with respect to waste volume reduction and production of combustible hydrogen-rich fuel gas. The effect of temperature and feed flow rate on product gas yield, product gas efficiency, solid residue yield, and H2/CO ratio has been evaluated. The experiments have been carried out at different temperatures within the range of 700-1000 °C. Plasma pyrolysis system exhibited combustible hydrogen-rich gas as a product and solid residue. Liquid products have not been observed during plasma pyrolysis, unlike conventional pyrolysis. The reaction mechanism of plastic cracking has been discussed based on literature and products obtained in the present work. The effects of feed flow rate and temperature on exergy efficiency were studied using the response surface method. The mass, energy, and exergy analyses have also been carried out for all the experiments, which are in the range of 0.95-0.99, 0.48 to 0.77, and 0.30 to 0.69, respectively.

Biodegradation of polyethylene in digestive gland homogenates of marine invertebrates.

Вiotic factors may be the driving force of plastic fragmentation along with abiotic factors. Since understanding the processes of biodegradation and biological depolymerization of plastic is important, a new methodological approach was proposed in this study to investigate the role of marine invertebrate digestive enzymes in plastic biodegradation. The aim of this study is to evaluate the possibility of enzymatic biodegradation of polyethylene fragments in the digestive gland homogenate of marine invertebrates differing in their feeding type (Strongylocentrotus nudus, Patiria pectinifera, Mizuhopecten yessoensis). Significant changes are found in the functional groups of the polymer after 3 days of incubation in the digestive gland homogenates of the studied marine invertebrates. A significant increase in the calculated CI (carbonyl index) and COI (сarbon-oxygen index) indices compared to the control sample was observed. The results suggest that digestive enzymes of studied organisms may play an important role in the biogeochemical cycling of plastic.

Mechanistic interpretation of the sorption of terbuthylazine pesticide onto aged microplastics.

Microplastics (MPs) pose a global concern due to their ubiquitous distribution. Once in the environment, they are subject to aging, which changes their chemical-physical properties and ability to interact with organic pollutants, such as pesticides. Therefore, this study investigated the interaction of the hydrophobic herbicide terbuthylazine (TBA), which is widely used in agriculture, with artificially aged polyethylene (PE) MP (PE-MP) to understand how aging affects its sorption. PE was aged by an accelerated weathering process including UV irradiation, hydrogen peroxide, and ultrasonic treatment, and aged particles were characterized in comparison to pristine particles. Sorption kinetics were performed for aged and pristine materials, while further sorption studies with aged PE-MP included determining environmental factors such as pH, temperature, and TBA concentration. Sorption of TBA was found to be significantly lower on aged PE-MP compared to pristine particles because aging led to the formation of oxygen-containing functional groups, resulting in a reduction in hydrophobicity and the formation of negatively charged sites on oxidized surfaces. For pristine PE-MP, sorption kinetics were best described by the pseudo-second-order model, while it was intra-particle diffusion for aged PE-MP as a result of crack and pore formation. Sorption followed a decreasing trend with increasing pH, while it became less favorable at higher temperatures. The isotherm data revealed a complex sorption process on altered, heterogeneous surfaces involving hydrophobic interactions, hydrogen bonding, and π-π interactions, and the process was best described by the Sips adsorption isotherm model. Desorption was found to be low, confirming a strong interaction. However, thermodynamic results imply that increased temperatures, such as those resulting from climate change, could promote the re-release of TBA from aged PE-MP into the environment. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed TBA sorption onto PE.

Insight into the adsorption behaviors and bioaccessibility of three altered microplastics through three types of advanced oxidation processes.

Advanced oxidation processes (AOPs) can significantly alter the structural properties, environmental behaviors and human exposure level of microplastics in aquatic environments. Three typical microplastics (Polyethylene (PE), polypropylene (PP), and polystyrene (PS)) and three AOPs (Heat-K2S2O8 (PDS), UV-H2O2, UV-peracetic acid (PAA)) were adopted to simulate the process when microplastics exposed to the sewage disposal system. 2-Nitrofluorene (2-NFlu) adsorption experiments found the equilibrium time decreased to 24 hours and the capacity increased up to 610 µg g-1, which means the adsorption efficiency has been greatly improved. The fitting results indicate the adsorption mechanism shifted from the partition dominant on pristine microplastic to the physical adsorption (pore filling) dominant. The alteration of specific surface area (21 to 152 m2 g-1), pore volume (0.003 to 0.148 cm3 g-1) and the particle size (123 to 16 µm) of microplastics after AOPs are implying the improvement for pore filling. Besides, the investigation of bioaccessibility is more complex, AOPs alter microplastic with more oxygen-containing functional groups and lower hydrophobicity detected by XPS and water contact angle, those modifications have increased the sorption concentration, especially in the human intestinal tract. Therefore, this indicates the actual exposure of organic compounds loaded in microplastic may be higher than in the pristine microplastic. This study can help to assess the human health risk of microplastic pollution in actual environments.

New insights into the size-independent bioactive potential of pristine and UV-B aged polyethylene microplastics.

The present study investigates the morphological, physicochemical, and structural changes occurred by the UV-B aging process of low-density polyethylene microplastics (LDPE MPs), as well as the bioactive potential of both pristine and UVaged MPs towards healthy peripheral blood lymphocytes. Specifically, LDPE MPs (100-180 µm) prepared by mechanical milling of LDPE pellets, were UV-B irradiated for 120 days (wavelength 280 nm; temperature 25 °C; relative humidity 50 %) and further examined for alterations in their particle size and surface, their functional groups, thermal stability, and crystallinity (by means of SEM, FTIR spectroscopy, XRD patterns, and TGA measurements, respectively). In parallel, isolated human peripheral blood lymphocytes were treated with different concentrations (25-500 µg mL-1) of either pristine or aged MPs (UVfree and UV120d LDPE MPs) for assessing the cytogenotoxic (by means of trypan blue exclusion test and the cytokinesis-block micronucleus assay using cytochalasin-B) and oxidative effects (using the DCFH-DA staining) in both cases. According to the results, UVfree and UV120d-LDPE MPs, with a size ranging from 100 to 180 µm, can differentially promote cytogenotoxic and oxidative alterations in human lymphocytes. In fact, UVfree LDPE MPs not being able to be internalized by cells due to their size, could indirectly promote the onset of mild oxidative and cytogenotoxic damage in human peripheral lymphocytes, via a dose-dependent but size-independent manner. The latter is more profound in case of the irregular-shaped UV120d-LDPE MPs, bearing improved dispersibility and sharp edges (by means of cracks and holes), as well as oxygen-containing and carbonyl groups. To our knowledge, the present findings provide new data regarding the bioactive behavior of pristine and UV-B aged LDPE MPs, at least in the in vitro biological model tested, thus giving new evidence for their size-independent and/or indirect mode of action.

Adsorption-desorption behavior of florpyrauxifen-benzyl on three microplastics in aqueous environment as well as its mechanism and various influencing factors.

Microplastics (MPs) and pesticides are two categories contaminants with proposed negative impacts to aqueous ecosystems, and adsorption of pesticides on MPs may result in their long-range transport and compound combination effects. Florpyrauxifen-benzyl, a novel pyridine-2-carboxylate auxin herbicide has been widely used to control weeds in paddy field, but the insights of which are extremely limited. Therefore, adsorption and desorption behaviors of florpyrauxifen-benzyl on polyvinyl chloride (PVC), polyethylene (PE) and disposable face masks (DFMs) in five water environment were investigated. The impacts of various environmental factors on adsorption capacity were evaluated, as well as adsorption mechanisms. The results revealed significant variations in adsorption capacity of florpyrauxifen-benzyl on three MPs, with approximately order of DFMs > PE > PVC. The discrepancy can be attributed to differences in structural and physicochemical properties, as evidenced by various characterization analysis. The kinetics and isotherm of florpyrauxifen-benzyl on three MPs were suitable for different models, wherein physical force predominantly governed adsorption process. Thermodynamic analysis revealed that both high and low temperatures weakened PE and DFMs adsorption, whereas temperature exhibited negligible impact on PVC adsorption. The adsorption capacity was significantly influenced by most environmental factors, particularly pH, cations and coexisting herbicide. This study provides valuable insights into the fate of florpyrauxifen-benzyl in presence of MPs, suggesting that PVC, PE and DFMs can serve as carriers of florpyrauxifen-benzyl in aquatic environment.

From cracks to secondary microplastics - surface characterization of polyethylene terephthalate (PET) during weathering.

Secondary microplastics are a product of the fragmentation of plastic debris. Despite concerns regarding the omnipresence of microplastics in the environment, knowledge about the mechanics of their actual formation is still limited. Fragmentation is usually linked to weathering, which alters the properties of the plastic and allows fragmentation to occur. Therefore, in this study, polyethylene terephthalate (PET) samples were exposed to artificial UV light or a combination of UV light and water for a total of three months to simulate natural weathering. The samples included three forms of PET with different production histories: pellets, yarns, and films. The surface alterations to the samples during weathering were characterized using scanning electron microscopy and Raman spectroscopy. Results indicated that the three different types of PET developed markedly different surface defects and also exhibited signs of weathering within different time frames. Differences were also found between samples exposed only to UV and those exposed to UV and submerged in water. In water, the first surface changes were spotted within 30 days of initial submersion and later developed into an organized crack network. Upon the introduction of mild mechanical forces, pieces of the weathered surface started to delaminate. The fragments from films had an elongated shape with a median size of 16.1 × 2.1 × 1.8 µm, resembling a fibre. If the weathered surface of a film were to detach completely, it could create 1.4-7.9 million microplastic fragments/cm2. For pellets, this number would range between 0.4 and 2.2 million microplastics/cm2. In addition to particle formation by surface delamination, particles also emerged on the weathered surfaces of all studied samples, presenting another possible source of micro-sized particles during weathering. Overall, the results of this work show that the weathering of plastics and the formation of microplastics are heavily influenced not only by the weathering mechanism but also by the type and production history of the polymers.

Adsorption interactions between typical microplastics and enrofloxacin: Relevant contributions to the mechanism.

Microplastics (MPs) are increasingly contaminating the environment and they can combine with antibiotics as carriers to form complex contaminants. In this study, we systematically investigated the interactions between the antibiotic enrofloxacin (ENR) and MPs comprising polyethylene (PE), polyvinyl chloride (PVC), and polystyrene (PS). Characterization was performed by using conventional techniques and the mechanisms involved in interactions were initially explored based on adsorption kinetics, isotherms, and resolution experiments, and the adsorption capacities of the MPs were determined. In addition, the extended Derjaguin-Landau-Verwey-Overbeek theory was used to investigate the interaction mechanisms. The results showed that the interactions were weaker in strong acidic and alkaline environments, and the interactions were also inhibited at higher salt ion concentrations. The saturation adsorption amounts of ENR on PVC, PE, and PS were 74.63 µg/g, 103.09 µg/g, and 142.86 µg/g, respectively. The interactions between MPs and ENR were dominated by hydrophobic interactions, followed by van der Waals forces and acid-base forces. This study provides new insights into the adsorption behavior of ENR by MPs.

Biodegradation of polyethylene and polystyrene by Zophobas atratus larvae from Bangladeshi source and isolation of two plastic-degrading gut bacteria.

Plastic pollution has become a major environmental concern globally, and novel and eco-friendly approaches like bioremediation are essential to mitigate the impact. Low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and expanded polystyrene (EPS) are three of the most frequently used plastic types. This study examined biodegradation of these using Zophobas atratus larvae, followed by isolation and whole genome sequencing of gut bacteria collected from larvae frass. Over 36 days, 24.04 % LDPE, 20.01 % EPS, and 15.12 % LLDPE were consumed on average by the larvae, with survival rates of 85 %, 90 %, and 87 %, respectively. Fourier transform infrared spectroscopy (FTIR) analysis of fresh plastic types, consumed plastics, and larvae frass showed proof of plastic oxidation in the gut. Frass bacteria were isolated and cultured in minimal salt media supplemented with plastics as the sole carbon source. Two isolates of bacteria were sampled from these cultures, designated PDB-1 and PDB-2. PDB-1 could survive on LDPE and LLDPE as carbon sources, whereas PDB-2 could survive on EPS. Scanning Electron Microscopy (SEM) provided proof of degradation in both cases. Both isolates were identified as strains of Pseudomonas aeruginosa, followed by sequencing, assembly, and annotation of their genomes. LDPE- and LLDPE-degrading enzymes e.g., P450 monooxygenase, alkane monooxygenase, alcohol dehydrogenase, etc. were identified in PDB-1. Similarly, phenylacetaldehyde dehydrogenase and other enzymes involved in EPS degradation were identified in PDB-2. Genes of both isolates were compared with genomes of known plastic-degrading P. aeruginosa strains. Virulence factors, antibiotic-resistance genes, and rhamnolipid biosurfactant biosynthesis genes were also identified in both isolates. This study indicated Zophobas atratus larvae as potential LDPE, LLDPE, and EPS biodegradation agent. Additionally, the isolated strains of Pseudomonas aeruginosa provide a more direct and eco-friendly solution for plastic degradation. Confirmation and modification of the plastic-degrading pathways in the bacteria may create scope for metabolic engineering in the future.

Interaction mechanism of water-soluble inorganic arsenic onto pristine nanoplastics.

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9-24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O-C, C-H, and C-Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants.

Biodegradation of low-density polyethylene by plasma-activated Bacillus strain.

Plastic biodegradation by microorganisms is an eco-friendly and sustainable method without any ramifications. Herein, we used a cultivation method and 16S rRNA sequencing to screen bacteria that can efficiently colonize and degrade low-density polyethylene (LDPE) from various plastic wastes. We identified Bacillus safensis BS-10L through whole-genome sequencing analysis and verified its LDPE-degradation ability. However, the decomposition mechanism of the isolated bacteria was unclear and the decomposition efficiency was insufficient, so low-temperature plasma was used to increase the decomposition efficiency of the bacteria. The population and viability of bacteria treated with cold plasma increased. Plasma-activated bacteria could induce cracks, holes, and roughness on the surface of LDPE films over 90 days, and over 30 days; the LDPE film lost 13.40 ± 0.013% and 27.78 ± 0.014% of its mass by BS-10L and plasma-treated BS-10L, respectively. Fourier-transform infrared spectroscopic analysis identified new peaks of the C=O and C-O groups in the plasma-treated LDPE film, exhibiting high transmittance in the LDPE film that was inoculated with bacteria. X-ray photoelectron spectroscopic analysis showed that C-O bonds were generated by BS-10L strain, and relatively strong C=O bonds were generated in the film inoculated with plasma-treated BS-10L strain. Plasma treatment increased the colonization of the BS-10L strain and changed the chemical bonding of the LDPE film, suggesting that plasma-activated BS-10L could accelerate decomposition by oxidation by increasing the carbonyl group of the PE film. Therefore, plasma technology may be effective for enhancing the plastic-degrading ability of microorganisms.

Mechanical and antibacterial properties of hybrid polymers composite reinforcement for biomedical applications.

This research investigates the biocompatibility, mechanical strength, and tribological properties of a hybrid composite material composed of high-density polyethylene (HDPE), hydroxyapatite (HAp), and titanium dioxide nanoparticles (Ti O2). The study explores the microstructural characteristics of the composite material using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Samples of HDPE-30%HAp with varying concentrations of Ti O2 (5, 10, 15, and 20%) were prepared and extruded using a twin-screw machine. The hybrid composite materials underwent mechanical tests (tensile, flexural, and hardness), tribological tests (friction and wear rate), and antibacterial tests (resistance to Escherichia coli and Staphylococcus aureus bacteria). The results indicate that the optimal hybrid composite sample was HDPE-30%HAP-10% Ti O2, which demonstrated excellent mechanical properties (maximum tensile strength of 25.93 MPa and young modulus of 480 MPa) and a low coefficient of friction (COF∼ 0.07) while achieving high wear resistance (wear rate in the order of 10-4 m m3N-1 m-1). The study shows that the improvement in mechanical properties results in a corresponding improvement in tribological properties. The antibacterial tests revealed that the hybrid composite material exhibited resistance to E. coli and S. aureus bacteria. The findings of this study suggest that the HDPE-30%HAP-10% Ti O2 composite is a promising material for use in biomedical applications due to its excellent biocompatibility and desirable mechanical and tribological properties. The study demonstrates the potential of reinforced hybrid composite materials in overcoming the disadvantages of monolithic and hybrid micro-composites and highlights the importance of investigating the microstructural, tribological, and mechanical strength characteristics of composite materials for biomedical applications.

Characterizing graft distribution in maleic anhydride grafted polyethylene - GPC with IR and UV-detection.

As commodity plastics, polyolefins are in high demand and used in innumerable applications. An important reason for their success-story is their high versatility in terms of applications. The application range of polyolefins was significantly extended through the development of functionalization. A common functionalization for improving the compatibility of polyolefins with more polar polymers and surfaces is grafting with maleic anhydride. While maleic anhydride-grafted polyolefins have found widespread application, methods for their characterization remain rudimentary compared to the developments seen in the structural characterization of polyolefins in general. Herein, we propose two new approaches for determining the degree of functionalization as a function of the molar mass of maleic anhydride grafted polyolefins. On the one hand, the latest generation bandpass filter-based IR detectors are shown to be sensitive to the carbonyl moiety of MAH. After optimization of analysis conditions, the relation between MAH content and molar mass could be unraveled in an easily applicable approach suitable for routine analysis. On the other hand, the high reactivity of MAH was leveraged in a tagging approach. By imidization with a UV chromophore, MAH distribution can be assessed by HT-GPC-UV with significantly higher sensitivity compared to HT-GPC-IR.

Antimicrobial potential of linear low-density polyethylene food packaging with Ag nanoparticles in different carriers (Silica and Hydroxyapatite).

Silver nanoparticles incorporation into polymeric packaging aims to prevent microbiological contamination in food products, thus ensuring superior food safety and preservation. In this context, this study aimed to verify the antimicrobial efficacy of linear low-density polyethylene (LLDPE) films incorporated with silver nanoparticles (AgNPs) dispersed in silica (SiO2) and hydroxyapatite (HAP) carriers at different concentrations. AgNPs + carriers polymer films were characterized at 0.2, 0.4, and 0.6% concentrations using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission gun-scanning electron microscope (FEG-SEM), thermogravimetric analyzer (TGA), differential scanning calorimetry (DSC), and migration in acidic and non-acidic simulants. Antimicrobial action was investigated on Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli, and the Penicillium expansum and Fusarium solani fungi with antimicrobial activity by direct contact test and bacterial imaging by scanning electron microscopy. AgNPs addition to the LLDPE matrix did not interfere with the films' chemical and thermal properties and presented no significant migration to the external medium. For antimicrobial action, silver nanoparticles showed, in most concentrations, an inhibition percentage higher than 90% on all microorganisms studied, regardless of the carrier. However, a greater inhibitory action on S. aureus and between carriers was found, making hydroxyapatite more effective. The results indicated that nanostructured films with AgNPs + hydroxyapatite showed more promising antimicrobial action on microorganisms than AgNPs + silica, making hydroxyapatite with silver nanoparticle potentially useful in food packaging, improving safety and maintaining quality.

Uncovering the intricate relationship between plant nutrients and microplastics in agroecosystems.

Recent scientific and media focus has increased on the impact of microplastics (MPs) on terrestrial and soil ecosystems. However, the interactions between MPs with macronutrients and micronutrients and their potential consequences for the agroecosystem are not well understood. Wheat (Triticum aestivum) is a staple food grown globally and has special importance for nations economies. Different elements can cause dangerous outcomes for wheat quality and production yield. In this study, batch adsorption experiments were done using 1 g of polyethylene tetra phthalate MP particles (PET-MPs) in varying concentrations of thirteen elements. The adsorption data were fitted by two common adsorption models (Langmuir and Freundlich). The effect of pH on the speciation of elements in aqueous solutions was investigated. The non-invasive characterization methods indicate the importance of O- and H-containing groups as the main component of selected MPs in controlling the adsorption of the elements ions. In the current study, adsorption and potential transport of the adsorbed macronutrients (K and Na) and micronutrients (Ni, Co, Cu, Al, Ba, Se, Fe, As, B, V and Ag) which include some beneficial (Na, Se, V), and non-essential or toxic elements (Al, As, Ag, Ba) onto MPs to the simulated roots of wheat were evaluated. The maximum sorption capacities of K+> Ni+2> Na+ > Co2+> Cu2+>Al+3 >Ba+2 >Se4+>Fe2+ >As5+ >B3+ >V5+> Ag + on PET-MPs at pH 5.8 and 25 ± 1 °C were 290.6 > 0.52> 0.51 > 0.20> 0.10 > 0.051> 0.024 > 0.003> 0.003 > 0.0015> 5.05 × 10-4> 1.7 × 10-4>3.7 × 10-6 mg g-1, respectively. The results highlight the importance of PET-MPs in controlling element adsorption in the rhizosphere. Our observations provide a good start for understanding the adsorption of multiple elements from the soil rhizosphere zone by PET-MPs.

Effect of Mass Fraction on Leaching Kinetics of Hydrophobic Ultraviolet Stabilizers in Low-Density Polyethylene.

The leaching kinetics of five hydrophobic ultraviolet (UV) stabilizers from low-density polyethylene (LDPE) (micro)fibers into water was evaluated in this study, with variation of the mass fraction (ω = 0.1-2.0 wt %) of the stabilizers. A one-dimensional convection-diffusion model for a cylindrical geometry, requiring partitioning between the LDPE fibers and water (KLDPEw) and the internal diffusion coefficients (DLDPE), was used to evaluate the leaching process and the leaching half-life of the target UV stabilizers at ω < 0.5 wt % (Case I). Diffusion through the aqueous boundary layer is the rate-determining step, and the leaching half-life is predicted to be very long (a few months to years) under unaffected conditions. When the UV stabilizers are supersaturated within LDPE fibers (i.e., ω > 0.5 wt %, Case II), the possible formation of a surficial crystal layer of the additives on the LDPE fiber extends the time scale for leaching compared to that in Case I due to the requirement of overcoming the crystallization energy. This study provides a fundamental understanding of the leaching profiles of plastic additives for assessing their potential chemical risks in aquatic environments; further studies under the relevant environmental conditions are required.

Biodegradation and Detoxification of Low-Density Polyethylene (LDPE) by Stenotrophomonas sp. and Alcaligenaceae bacterium.

Every year, human activities introduce large amounts of synthetic plastics into the environment. Decomposition of the plastic derivatives is very difficult and time consuming, so it is essential to eliminate these pollutants using different methods. Bioremediation, is suitable option, because of the low cost and environmentally safe. In this research, degradation of low-density polyethylene (LDPE) was investigated by two strains, isolated from Hamadan province (Iran) landfill soil. After identification by 16sr DNA primers, their abilities of polyethylene biodegradation were examined by Fourier transform infrared (FTIR), SEM and Gas Chromatography-Mass Spectrometry (GC-MS). Using media contain polyethylene) after and before addition of bacteria), toxicity test was conducted by measuring the germination index, root and hypocotyl length of Lactuca sativa seed. After three months, 10.15% ± 1.04 weight loss of LDPE achieved through strain Stenotrophomonas sp. degradation. Both strains had high biofilm formation capacity, confirmed by Electron microscope images and FTIR analysis. GC-MS confirmed the presence of the end-product of LDPE degradation (Pentacosane, Hexacosane, and Octadecane). Both, Stenotrophomonas sp. and Alcaligenaceae bacterium had significant detoxification ability. In media contain LDPE (without bacteria), decrease in the germination of lettuce seeds was observed.

Application of low-energy-capable electron ionization with high-resolution mass spectrometer for characterization of pyrolysis oils from plastics.

Pyrolysis is a promising way of waste transformation into new valuable products. Pyrolytic oil is a mixture of hundreds of compounds and it requires detailed and accurate characterization for future applications. One of the most widely used techniques is mass spectrometry in combination with electron ionization. Tuneable ionization provides benefits including additional structural information and validation of molecular ion due to limited fragmentation at lower energies compared to conventional 70 eV, which provides spectral matches towards libraries. This approach was applied to the compounds identification and group characterization of virgin plastics polyvinyl chloride (PVC), polypropylene (PP), polystyrene (PS), high-density polyethylene (HDPE), low-density polyethylene (LDPE) and their mixture. The use of lower ionization energy was beneficial for distinction of alkanes, iso-alkanes and aromatics. On the contrary to 70 eV, significantly higher fragmentation in branching of iso-alkanes at 12 eV was observed with higher yield of molecular ion also for n-alkane. More than 50 % of detected peaks were identified up to the retention time of icosane. The main analytes of produced pyrolysis oil were monoaromatic (from PVC and PS), alkene/cycloalkane (from PP and mixture). In the case of HDPE and LDPE the main compounds were 1-n-alkenes and n-alkanes. The applied methodology reveals compound group, carbon chain length and degree of unsaturation with higher confidence and success rate compared to traditional nominal mass 70 eV datasets.